• KS 13-2DEW 1/3 ATSR
  • KS 13-2DEW 1/3 ATSR
  • KS 13-2DEW 1/3 ATSR
  • KS 13-2DEW 1/3 ATSR
  • KS 13-2DEW 1/3 ATSR
  • KS 13-2DEW 1/3 ATSR

KS 13-2DEW 1/3 ATSR

Diesel generator "Könner & Söhnen"
Voltage 230/400 V
Max power (230V) 8.1 kW
Nominal power (230V) 7.7 kW
Max power (400V) 11.25 kVA
Nominal power (400V) 10.63 kVA
Engine power 18 HP
Engine start Electric
Fuel type Diesel
Engine model KS 820HD
Outlets 1x32A (230V)
1x16A (230V)
1x32A (400V)
1x16A (400V)
Crank case volume 3.3 l
Accumulator 45 Ah
Preheater +
Net weight 310 kg
Frequency 50 Hz

The generators of this series are developed on the basis of modern heavy-duty two-cylinder watercooled engines (18 hp), increased service life (more than 3000 operating hours). Models KS 13 diesel generators from TM Könner & Söhnen feature a unique VTS phase switching system suitable for singlephase (230V) or three-phase (400V) operation with almost no loss of power. Mini-power plants have two design types: exposed, equipped with LED-display (voltage, frequency, working hours) and enclosed in a soundproof anti-vandal housing with a multifunctional controller and remote control.

All generators of this series are suitable for connecting the АТS (automatic transfer switch) system and equipped with an automatic monitoring system for all key indicators of the operating status: overload protection, automatic engine stop at low oil level, fuel level sensor. HEAVY DUTY series generators are intended for use not only as a backup power source, but also for continuous operation.


High-performance optimally balanced V-twin water-cooled two-cylinders four-stroke engine (18 hp), which ensures reduced vibration of the generator during operation and it has the enlarged motor resource.


All-season soundproof antivandal housing provides effective protection for the generator and extends its service life. The housing is equipped with handles and casters for easy handling.


The user-friendly ergonomic control panel allows easy control of the whole device, requires no special skills, and is equipped with sockets designed for removal of full power delivered by the generator.

Multifunctional control unit Smart Gen


ATS output


Battery voltage DC8.0-18V
Power consumption 10W
Voltage 230V / 400V
Power 230 V 14,4 (28,8) kW
Current (max) 230 V 63А (120А)
Power 400 V 34,8 Kw
Current (max) 230V 63А
Working environment -20-50°C humidity: 20-90%
Storage environment -30-70°C humidity: 20-90%
Dimensions (mm) 520 х 420 х 220
IP protection class IP41
Insulation class AC1.5KV / 1min 1mA
Maximum battery charging current from the built-in power supply
Control cable length 4.4 m
Nettogewicht, kg 8.85
Bruttogewicht, kg 9.8
The ATS (Automatic transfer switch) unit automatically starts the generator and transfers load to it when the main power supply is disconnected.
Gasolineand diesel generators with an electric starter are equipped with a universal 5-pin connector for an automatic transfer switch unit (ATS input). The ATS unit has a PLC that allows the automatic start/stop of the generator to be programmed in the event of a power outage and after its restoration.PROGRAMMABLE LOGIC CONTROLLER OF THE ATS UNIT:
– Automatic/manual operation
– Programming of engine starting time after power outage
– Programming of engine warm-up time before connecting to consumer
– Setting of starter operation time
– Engine performance monitoring
– Battery charging when the generator is off

The generator is suitable for connecting the ATS (Automatic Transfer Switch) system.
The ATS (Automatic Transfer Switch) unit automatically starts the generator and transfers load to it when the main power supply is disconnected and automatically stops the generator when the central power supply is restored. ATS output has a 6-pin connection.

Preheater function

Preheater function

All Heavy Duty series generators are equipped with a preheat function, which allows you to easily start a generator in winter.

Increased engine resource


Universal generators 2 in 1 have a unique VTS (voltage Transfer Switch) phase switching system, which allows using a single generator both in single-phase mode (230V) and in three-phase mode (400V) with almost no loss of power. Each mode has its own circuit breaker. There is no need to use two separate generators.

Increased warranty

Increased warranty

Heavy Duty series diesel generators have the extended warranty – 2 years or 3000 operating hours (whichever comes first) under condition of proper operation and scheduled maintenance.



Voltage, V 230/400
Max/Nominal power (230V), kW 8.1/7.7
Max/Nominal power (400V), kVA 11.25/10.63
Frequency, Hz 50
Current, A (max.) 36.96 / 16.26
Outlets 1x32A (230V)
1x16A (230V)
1x32A (400V)
1x16A (400V)
Fuel tank volume, l 25
Working time at 50% load, h* 11.4
Control panel Multifunctional digital controller SmartGen
Noise level Lpa (7m)/Lwa, dB 67/92
Power output DC, V/А
Engine model KS 820HD
Engine type Diesel powered V-twin water-cooled two-cylinder, four-stroke
Engine power, HP 18.0/13.24
Coolant volume, l 3.5
Crank case volume, l 3.3
Engine cylinder volume, cm3 794
Power output controller Intelligent voltage stabilization system AVR
Engine start Electric
Power factor, cosφ 1(230V)/0.8(400V)
Accumulator, Ah 45
Output for ATS +
Preheater +
Net dimensions (L*W*H), mm 1250x650x760
Gross dimensions (L*W*H), mm 1300x700x880
Net weight, kg 310
Gross weight, kg 345
Protection class IP23M
EAN code 4260405363186

*Fuel consumption depends on many factors, such as load, fuel quality, season, altitude, technical condition of the generator.