KS 8102HDE-1/3 ATSR (EURO II)

Diesel generator "Könner & Söhnen"
Voltage 230 V / 400 V
Max Power/Nominal Power, 230 V 5.5/5.0 kW
Max Power/Nominal Power, 400 V 6.5/6.0 kW
Engine power 14 HP
Accumulator 30 Ah
Output for ATS +
Preheater +
Engine start Manual/Electro
Fuel type Diesel
Engine model KS 480HD
Outlets 1x32A (230V)
1x16A (400V)
Crank case volume 1.65 l
50% power working time 12 h
Net weight 117 kg
Frequency 50 Hz

Könner & Söhnen engines

Könner & Söhnen engines

Engines for both diesel and gasoline generators are manufactured under the license of DIMAX Int. GmbH and are marked with K&S logo. High power of engines in relation to the alternator allows to receive the declared power output and maintain stable work at any load. All engines are tested for continuous operation, and then disassembled and examined for trouble-shooting purposes. Each engine and each generator have an individual serial number, which allows us to control the quality of production and service. The engines meet all European quality standards, including the level of harmful emissions and noise level.

VTS system

VTS system

Universal generators 2 in 1 with a unique phase switching system VTS (Voltage Transfer Switch), which allows you to use one generator as a single-phase (230V) and three-phase (400V) with almost no loss of power. Each mode has its own automatic protection. No need to buy two separate generators.

Automatic transfer switch

Automatic transfer switch

KS ATS 4/63HD

KS ATS 4/63HD
Battery voltage DC8.0-18V
Power consumption 10W
Voltage 230V / 400V
Power 230 V 14,4 (28,8) kW
Current (max) 230 V 63А (120А)
Power 400 V 34,8 Kw
Current (max) 230V 63А
Working environment -20-50°C humidity: 20-90%
Storage environment -30-70°C humidity: 20-90%
Dimensions (mm) 520 х 420 х 220
IP protection class IP41
Insulation class AC1.5KV / 1min 1mA
Maximum battery charging current from the built-in power supply
Control cable length 4.4 m
Nettogewicht, kg 8.85
Bruttogewicht, kg 9.8
The ATS (Automatic transfer switch) unit automatically starts the generator and transfers load to it when the main power supply is disconnected.
Gasolineand diesel generators with an electric starter are equipped with a universal 5-pin connector for an automatic transfer switch unit (ATS input). The ATS unit has a PLC that allows the automatic start/stop of the generator to be programmed in the event of a power outage and after its restoration.PROGRAMMABLE LOGIC CONTROLLER OF THE ATS UNIT:
– Automatic/manual operation
– Programming of engine starting time after power outage
– Programming of engine warm-up time before connecting to consumer
– Setting of starter operation time
– Engine performance monitoring
– Battery charging when the generator is off

KS ATS 1/40HD

KS ATS 1/40HD
Power, kW 9.2
Voltage, V 230
Current (MAX), A 40
The ATS (Automatic transfer switch) unit automatically starts the generator and transfers load to it when the main power supply is disconnected.
Gasolineand diesel generators with an electric starter are equipped with a universal 5-pin connector for an automatic transfer switch unit (ATS input). The ATS unit has a PLC that allows the automatic start/stop of the generator to be programmed in the event of a power outage and after its restoration.PROGRAMMABLE LOGIC CONTROLLER OF THE ATS UNIT:
– Automatic/manual operation
– Programming of engine starting time after power outage
– Programming of engine warm-up time before connecting to consumer
– Setting of starter operation time
– Engine performance monitoring
– Battery charging when the generator is off

5-pin input ATS for diesel generators, models: KS 14100HDE ATSR, KS 14200HDES ATSR.

KS ATS 3/18HD

KS ATS 3/18HD
Power, kW 12.5
Voltage, V 400
Current (MAX), A 18
The ATS (Automatic transfer switch) unit automatically starts the generator and transfers load to it
when the main power supply is disconnected.
Gasolineand diesel generators with an electric starter are equipped with a universal 5-pin
connector for an automatic transfer switch unit (ATS input). The ATS unit has a PLC that allows the
automatic start/stop of the generator to be programmed in the event of a power outage and after
its restoration.PROGRAMMABLE LOGIC CONTROLLER OF THE ATS UNIT:

– Automatic/manual operation
– Programming of engine starting time after power outage
– Programming of engine warm-up time before connecting to consumer
– Setting of starter operation time
– Engine performance monitoring
– Battery charging when the generator is off

5-pin input ATS for diesel generators, models: KS 8100HDE-1/3 ATSR, KS 9100HDE-1/3 ATSR, KS 8200HDES-1/3 ATSR, KS 9200HDES-1/3 ATSR, KS 14100HDE-1/3 ATSR, KS 14200HDES-1/3 ATSR

The ATS (Automatic Transfer Switch) unit automatically starts the generator and transfers load to it when the main power supply is disconnected and automatically stops the generator when the central power supply is restored.

Increased engine resource

Increased engine resource

Heavy Duty series generators can be used not only as emergency power source, but also for long-term full-time operation. The engine resource exceeds 3000 working hours, this is confirmed by multi-hour, multi-level tests and warranty. To show high performance, machines should be maintained properly.

Increased warranty

Increased warranty

Heavy Duty series diesel generators have the extended warranty – 2 years or 3000 operating hours (whichever comes first) under condition of proper operation and scheduled maintenance.

Ergonomic control panel

Ergonomic control panel

Convenient and ergonomic generator’s control panel allows you to control the entire unit easily and does not require additional skills. The modern intelligent LED display will always indicate the number of hours worked, frequency and voltage output. The information on the display helps to control the device load and timely maintain the generator, extending the operation life.

Preheater function

Preheater function

All Heavy Duty series generators are equipped with a preheat function, which allows you to easily start a generator in winter.

AVR

AVR

“Könner & Söhnen” series diesel generators are equipped with intelligent voltage stabilization system AVR. It allows to keep the voltage at a constant value of 230 V and protects against unwanted short circuits.

Enforced frame

Enforced frame

Additional frame reinforcement with the upper protective strips allows HEAVY DUTY professional series generators to operate in a more rigid mode. The reinforced frame structure protects the tank against damage during operation and transportation.

Dampers to lower vibration

Dampers to lower vibration

All models of Könner & Söhnen generators are equipped with rubber feet to reduce vibrations. The working generator will not damage the floor covering, and the frame coating will not be scratched.

Accessories set

Accessories set

Generator is equipped with additional accessories: a portable 2P+PE 16A 230V power plug, a portable 2P+E 230V 32A power plug, a 8x10mm hook key, 12x14mm and 17x19mm keyholes and a two way 6.0mm PH2 screwdriver.

Voltage, V 230
Max power 230V, kW 5.5
Nominal power 230V, kW 5.0
Max power 400V, kW 6.5
Nominal power 400V, kW 6.0
Frequency, Hz 50
Current, A (max) 23.04/11.74
Sockets 1×16А (400V), 1×32А (230V)
Fuel tank volume, l 15
50% power working time, h 12
LED-display Voltage, frequency, working hours
Noise level Lpa/Lwa, dB 71/96
Power output DC, V/А 12/8.3
Engine model KS 480HD
Engine type Diesel powered one-cylinder, four-stroke air-cooled
Engine power hp/kW 14.0/10.3
Crank case volume, cm3 1.65
Engine cylinder volume, cm3 456
Power output controller Intelligent voltage stabilization system AVR
Engine start Manual / Electro
Power factor, cosφ 1/0.8
The diameter of the frame, mm 32, round
Accumulator, Ah 30
Output for ATS
Net dimensions (L*W*H), mm 730x495x630
Gross dimensions (L*W*H), mm 750x550x670
Net weight, kg 117
Gross weight, kg 125
Protection class IP23M
EAN code 4260405363698