The generators of this series are developed on the basis of modern heavy-duty two-cylinder watercooled engines (18 hp), increased service life (more than 3000 operating hours). Models KS 13 diesel generators from TM Könner & Söhnen feature a unique VTS phase switching system suitable for singlephase (230V) or three-phase (400V) operation with almost no loss of power. Mini-power plants have two design types: exposed, equipped with LED-display (voltage, frequency, working hours) and enclosed in a soundproof anti-vandal housing with a multifunctional controller and remote control.
All generators of this series are suitable for connecting the АТS (automatic transfer switch) system and equipped with an automatic monitoring system for all key indicators of the operating status: overload protection, automatic engine stop at low oil level, fuel level sensor. HEAVY DUTY series generators are intended for use not only as a backup power source, but also for continuous operation.
 |
HIGH-PERFORMANCE TWO-CYLINDER ENGINE
High-performance optimally balanced V-twin water-cooled two-cylinders four-stroke engine (18 hp), which ensures reduced vibration of the generator during operation and it has the enlarged motor resource. |
 |
Housing
All-season soundproof antivandal housing provides effective protection for the generator and extends its service life. The housing is equipped with handles and casters for easy handling. |
 |
ERGONOMIC CONTROL PANEL
The user-friendly ergonomic control panel allows easy control of the whole device, requires no special skills, and is equipped with sockets designed for removal of full power delivered by the generator. |
 |
SMART GEN
|
 |
CONTACT STRIPE
High-performance two-cylinder diesel generators from TM Könner & Söhnen are equipped with top-notch contact strips for connecting electrical cables, which allows removing the full power delivered by the unit. |
 |
ATS output
Battery voltage |
DC8.0-18V |
Voltage |
230/400 V |
Power 230 V |
14.4 (28.8) kW |
Current (max) 230 V |
63 (120) A |
Power 400 V |
34.8 kW |
Current (max) 230V |
63 A |
Working environment |
from -10°C to +55°C;
humidity: ⩽60% |
Storage environment |
from -10°C to +70°C;
humidity: ⩽60% |
IP protection class |
IP41 |
Insulation class |
AC1.5KV / 1min 1mA |
Maximum battery charging current from the built-in power supply |
2А |
Control cable length |
3.0 m |
Net dimensions (L*W*H) |
400х320х200 mm |
Gross dimensions (L*W*H) |
460х380х250 mm |
Net weight |
6.5 kg |
Gross weight |
7.9 kg |
EAN code |
4260405362455 |
The ATS (Automatic transfer switch) unit automatically starts the generator and transfers load to it when the main power supply is disconnected.
Gasoline and diesel generators with an electric starter are equipped with a universal 6-pin connector for an automatic transfer switch unit (ATS input). The ATS unit has a PLC that allows the automatic start/stop of the generator to be programmed in the event of a power outage and after its restoration.
PROGRAMMABLE LOGIC CONTROLLER OF THE ATS UNIT:
– Automatic/manual operation
– Programming of engine starting time after power outage
– Programming of engine warm-up time before connecting to consumer
– Setting of starter operation time
– Engine performance monitoring
– Battery charging when the generator is off
The KS ATS 4/63HD ATS unit is compatible with all Könner & Söhnen diesel generators with the abbreviation “ATSR” in the article number.
The generator is suitable for connecting the ATS (Automatic Transfer Switch) system.
The ATS (Automatic Transfer Switch) unit automatically starts the generator and transfers load to it when the main power supply is disconnected and automatically stops the generator when the central power supply is restored. ATS output has a 6-pin connection. |
 |
Preheater function
All Heavy Duty series generators are equipped with a preheat function, which allows you to easily start a generator in winter. |
 |
Increased warranty
Heavy Duty series diesel generators have the extended warranty – 2 years or 3000 operating hours (whichever comes first) under condition of proper operation and scheduled maintenance. |
 |
Accessories
|
Voltage, V |
230 |
Max power, kW |
9.0 |
Nominal power, kW |
8.5 |
Frequency, Hz |
50 |
Current, A (max) |
39.13 |
Outlets |
1x53A, 1×32А, 2×16А |
Fuel tank volume, l |
25 |
Working time at 50% load, h* |
11.4 |
Control panel |
Multifunctional digital controller SmartGen |
Noise level Lpa (7m)/Lwa, dB |
67/92 |
Power output DC, V/А |
– |
Engine model |
KS 820HD |
Engine type |
Diesel powered V-twin water-cooled two-cylinder, four-stroke |
Engine power hp/kW |
18 |
Coolant volume, l |
3.5 |
Crank case volume, l |
3.3 |
Engine cylinder volume, cm3 |
794 |
Power output controller |
Intelligent voltage stabilization system AVR |
Engine start |
Electric |
Power factor, cosφ |
1 |
Accumulator, Ah |
45 |
Output for ATS |
+ |
Preheater |
+ |
Net dimensions (L*W*H), mm |
1250x650x760 |
Gross dimensions (L*W*H), mm |
1300x700x880 |
Net weight, kg |
310 |
Gross weight, kg |
345 |
Protection class |
IP23M |
EAN code |
4260405363179 |
*Fuel consumption depends on many factors, such as load, fuel quality, season, altitude, technical condition of the generator.
Assembled in PRC.