| Voltage | 230 V |
| Max power | 4.0** kW |
| Nominal power | 3.6** kW |
| Engine start | Manual/electric |
| Outlets | 2 x Schuko 230 V |
| Special functions | LPG/gasoline, Parallel connection |
Inverter gasoline powered generators are a user-friendly portable source of energy. The range of inverter generators features models with a power range from 1.8 to 8.0 kW.
All models are based on robust engines, which meet all European quality standards, including EURO V. Engines of K&S inverter generators have an Economy mode, which allows using the generator at low speeds and reduces fuel consumption by up to 50%.
The built-in electronic unit with microprocessor control monitors the operation of the generator and provides a stable output voltage of 230V 50Hz sinusoidal form, which is suitable for the reliable operation of sensitive electronics.
The package includes everything you need to use LPG as fuel:
1. 1.5 m long hose for connecting a gas cylinder provides a convenient connection. Just connect the generator to the cylinder and start the engine.
2. The hose is equipped with a reducer that is mounted on the cylinder to increase the reliability of the gas line. It provides pressure reduction and eliminates the possibility of overloading the gas connection. Just connect the generator to the cylinder and start the engine.
You can use generator with both a portable gas cylinder and with a stationary capacity for gas storage (gasholder). Connection has to be made by a certified specialist. The pressure in the supply system must not exceed 16 Bar.
The Könner & Söhnen reliable engine is characterized by increased durability, long and stable operation, and meets all European quality standards, including EURO V.
The ergonomic control panel is equipped with a fuel economy mode switch. This mode reduces fuel consumption by up to 50% at small loads due to lower engine revolutions.
Convenient location of all functions: multifunction LED display (hour meter, frequency, voltage), working mode indicator, overload and short circuit protection, low oil level sensor, Reset button to reset the control system and restore voltage supply, connector for parallel connection of generators, two USB outputs (5V/1A, 5V/2.1A) for a wide range of gadgets, 230 V sockets and grounding terminal.
The use of gas as fuel significantly reduces fuel costs for operation of the device, and the difference in value between the gasoline powered generator and the DUAL FUEL hybrid generator from TM K&S quickly pays off.
Könner & Söhnen inverter generators are equipped with a robust brushless alternator with 100% copper winding. The high-end compact permanent magnet alternator is housed in a plastic casing and can withstand maximum loads without any damage to ensure long-term and reliable operation of the generator set.
| Cable (100% cooper) | AWG 2.08 mm2 |
| Maximum power | 7 kW |
| Cable length | 2х80 cm |
| Voltage | 230 V |
| Outlets | 1 x Schuko 230 V, 1 x CEE 230 V 32 A |
| Circuit breaker | + |
| Net weight | 1.36 kg |
| Gross weight | 1.60 kg |
| EAN code | 4260405362530 |
KS PU1 generator parallel unit from Könner & Söhnen allows to increase the total output power of generators by connecting two inverter generators together. Parallel connection of any two generator models provides output power equal to the combined rated powers of these models. At the same time, parallel connection of generators entails a power loss of 0.2 kW of the aggregate rated power which can be obtained.
It is suitable for all Könner & Söhnen inverter generators which are parallel ready:
KS PU1 generator parallel unit from Könner & Söhnen® allows to increase the total output power of generators by connecting two inverter generators together. Parallel connection of any two generator models provides output power equal to the combined rated powers of these models. At the same time, parallel connection of generators entails a power loss of 0.2 kW of the aggregate rated power which can be obtained. It is suitable for all Könner & Söhnen® inverter generators which are parallel ready: KS 2000i S, KS 2000iG S, KS 4000iE S, KS 4000iEG S, KS 4100iEG, KS 6000iE S
Könner & Söhnen Inverter generators are equipped with a transport system for easy movement. Two wheels and a handle that lifts when the generator is moved ensure comfortable transportation and mobility.
Generator is equipped with additional accessories: spark plug wrench, hosepipe with pressure reducer, PH2 screwdriver 6.0 mm.
Assembled in PRC.
**LPG operation reduces generator power by 10%.
*** Fuel consumption depends on many factors, such as load, fuel quality, season, altitude, technical condition of the generator.
Related products
