KS 50

Motor pump for clean water
Max. productivity 500 l/min
Nominal speed 3600 rpm
Max. lifting height 28 m
Max. suction depth 7 m
Engine type Gasoline
Engine model KS 200
Engine power 6.5 HP
Engine volume 196 cm3
Engine start Manual
Fuel tank 3.6 l
Net weight 24 kg

Water pumps for clean water are ideal for use in rural households, villas, and areas where there is a need to pump water out of basements or wells and to dry up flooded areas. Water pumps for pure water can be used for pumping liquids with particles up to 5-6 mm.

After starting the engine, allow the pump to run for about 30 seconds, then stop the engine and add more water to the pump to increase its efficiency and continue working.

Features:

  • Professional 4-stroke petrol engine, manufactured under the license of DIMAX Int. GmbH, Germany.
  • Reinforced steel frame with a diameter of 28 mm protects the engine from damage and facilitates transportation.
  • Compact size and light weight.
  • The case is made of high-strength alloy, which prevents corrosion, protected from temperatures effects and resistant to deformation due to frame protection.
  • Economic fuel consumption.
  • High performance.
Könner & Söhnen engines

RELIABLE BRANDED ENGINES KÖNNER & SÖHNEN TM

The engines used in the pumps „Könner & Söhnen” are manufactured under the strict control of german engineers.

Engines with individual serial numbers

INDIVIDUAL SERIAL NUMBER ON ENGINES

The robust Könner & Söhnen engine meets all European quality standards, including the latest EURO V emission standards. The proprietary robust K&S engine has its own individual serial number, which allows us to control the quality of production and service.

Steel tank

Equipment

Könner & Söhnen motor pumps are equipped with an enlarged steel fuel tank, which extends the operating time without additional refueling. The surface is made of high-strength aluminum using integrated cast technology, which is invulnerable to corrosion, temperature influence and deformations.

Dampers to lower vibration

Dampers to lower vibration

All models of the Könner & Söhnen pumps are equipped with rubber feet to reduce vibrations. Thanks to the rubber damper, the working pump will not damage the surface covering, and the frame coating will not be scratched.

Engine model KS 200
Engine volume, cm3 196
Engine power, HP 6.5
Fuel tank, l 3.6
Oil crankcase volume, l 0.6
Noise level Lpa (7m)/Lwa, dB 79/104
Max. productivity, l/min 500
Nominal speed, rpm 3600
Max. lifting height, m 28
Max. suction depth, m 7
Diameter of inlet pipe, mm 50
Diameter of outlet pipe, mm 50
Dimensions, mm 510×440×440
Net weight, kg 24
Gross weight, kg 26
EAN code 4260405361342